SenseCAP M2 Data Only
SenseCAP M2 is a LoRaWAN Gateway connected to the Helium LongFi Network and able to provide miles of wireless network coverage and data transmission capacity for LoRa/LoRaWAN devices. It provides built-in BLE, supports both Wi-Fi and Ethernet internet connection. You could easily set up the hotspot in a few simple steps via SenseCAP Hotspot App. SenseCAP Hotspot Dashboard, and Local Console are provided for users to manage the Hotspot in an efficient and easy way.

Package Contents

  • SenseCAP M2 LoRaWAN Indoor Gateway *1
  • Power Adapter (12V-2A) *1
  • LoRa Antenna (3dBi) *1
  • Antenna Base *1
Note: The Helium onboarding fee is not included in the product.
Package Contents

Interface

SenseCAP M2 Interface

LED Indicator

Mode
Status
Description
Green
Solid
Hotspot is healthy and the internet is well connected
Green
Slow Blinking
Hotspot is booting, please wait
Blue
Solid
The hotspot is ready for internet connection. Further configuration needed
Blue
Slow Blinking
Configuration mode, and will auto exit after 5 mins if no activity
Blue
Fast Blinking
Press the button for 30s until the indicator show fast flash will trigger factory reset
Orange
Slow Blinking
Firmware is updating, and please do not disconnect the hotspot or the internet
Red
Solid
Hardware issue or internet connection failure.
White
Solid
The hotspot is only with a factory firmware if LED shows solid white, and will be updated to the latest firmware automatically when it is connected to the internet

Button Modes

Mode
Description
Double Click
Quick double click will trigger a software reboot.
Press for 5s
Press the button for 5s and release until the blue indicator flash slowly will enter the configuration mode, and it will automatically exit in 5 mins if no activity.
Press for 30s
Press the button for 30s until the blue indicator flashes fast will trigger a factory reset and a software reboot.
Attention: Please do NOT use this function unless suggested by official tech support.